Model GS17
The 1:1 Redundant Converter System consists of an outdoor converter/switch assembly which mounts at the antenna hub, rack-mounted indoor local control unit and interconnection control cable.
Options Available : See Spec Sheet
Our company strives to innovate and reinvent the marketplace with our flagship lineup of commercial and military SATCOM products. This same ingenuity is also ingrained in our customer relationship and support systems.
| Model | Frequency Range (GHz) |
|---|---|
| UBE-6.1-INV | 5.85-6.425 |
| UBE-6.25 | 5.85-6.65 |
| UBE-6.9 | 6.7-7.1 |
| UBE-8.15 | 7.9-8.4 |
| UBE-13 | 12.75-13.25 |
| UBE-14.125 | 13.75-14.5 |
| UBE-14.25 | 14.0-14.5 |
| UBE-17.7 | 17.3-18.1 |
| UBE-17.85 | 17.3-18.4 |
| UBE-18.25 | 18.1-18.4 |
| DBE-3.8-INV | 3.4-4.2 |
| DBE-3.8 | 3.4-4.2 |
| DBE-3.95 | 3.7-4.2 |
| DBE-4.65 | 4.5-4.8 |
| DBE-7.5 | 7.25-7.75 |
| DBE-11.2 | 10.7-11.7 |
| DBE-11.35 | 10.95-11.7 |
| DBE-11.6 | 11.2-12.0 |
| DBE-11.85 | 11.45-12.25 |
| DBE-12.1 | 11.7-12.5 |
| DBE-12.225 | 11.7-12.75 |
| DBE-12.475 | 12.2-12.75 |
The Hub-mounted 1:1 Redundant Converter Systems are designed to ensure continuous operation with minimum disruption of signal transmission. The 1:1 Redundant Converter System consists of an outdoor converter/switch assembly which mounts at the antenna hub, rack-mounted indoor local control unit and interconnection control cable.
A fault condition in the on-line converter, or an operator generated command, will switch the standby converter to the on-line position and remove the on-line converter from the signal path.
